WilhelmSK

WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat.

WilhelmSK can connect to a Signal K server like the Signal K Node Server or a Signal K gateway like the iKommunicate.

It can also connect directly to some devices:

º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10)

º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs

º NMEA 2000 via Yacht Device's YDWG-02

º NMEA 2000 via Actisense's W2K-1

º Victron Venus GX or CCGX

º Victron VRM

RayMarine Auto Pilot Support (via node-server or the YDWG only)

º View or change current mode (Standby, Auto, Wind, Track)

º View current target heading or Wind direction

º Change target heading or Wind direction

º Acknowledge "Turn To Waypoint'

Active Captain:

º You can view Active Captain Points of Interest and review or comment on them.

º Go to Settings->Appearance to show Active Captain Points of Interest on the maps.

Alarms and Notifications

º View list of current current alarms

º Acknowledge RayMarine "Turn To Waypoint' *

º Push notification support *

º Setup server side alarms *

º Set an anchor alarm with the push of a button *

Features:

- Fusion stereo (control zone volumes, source input, play, pause etc.)

- Create a gauge for any value available via SignalK

- Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin)

- Customize gauge display using SignalK meta.zones

- Customize gauge range, min/max, etc.

- Save custom gauges to node server or the cloud for use on other devices

- Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning

- Place gauges by long pressing on a gauge and choosing a differnt one

- Make a gauge full screen by double tapping

- Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc.

- Customize the nuber of pages and their layout

- Manuall connection configuration synced accross devices via iCloud

- Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats)

- Two themes, dark and light

- Animated gauge needles

- iPad Slideover and Split View support (Your gauge configuration can be customized for these views)

- Connections can be configured to be refreshed manually or at a specific time interval

- Design your own custom gauge templates

- Share your custom templates via Air Drop, eMail, Text, etc.

- Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad

- Most gauges can be configured to be digital or analog

- Enter the SignalK path and title for any gauge to show data not supported by default

- Displays AIS targets in the Map views

- Configure node server plugins inside of the app

- IP and RTSP camera display

* Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup